The Vox AC30 with its new top front covering, holes are punched through for the new badge, also at this stage the under fret cloth is glued to the front baffle.
Next the speaker cloth is attached to the baffle and held in place by the gold strip, great care is needed at this stage as you need
to get the diamond pattern symmetrical and its not easy to pull the gold strip out again. Once in position the cloth can be stretched over the baffle and glued and stapled down.

See Picture below

Once the cloth as been fitted the white piping can be stapled to the outer edge.


The gold strip and speaker cloth being fitted
RRestoration Project